Recent content by Grumpy
-
Tundra calipers isf rotors
Like most high performance brake pad, you're going to have more brake dust than the standard one. Should be around $90 from your local Toyota dealerships. That's another good point about using OEM components for this BBK, parts are easy to obtain and relatively inexpensive.- Grumpy
- Post #15
- Forum: Aftermarket Brakes
-
Tundra calipers isf rotors
I would highly recommend using high performance brake pad set. Had two set of TRD pads on my stock calipers so I'm very familiar with their characteristics. Easy choice when it was time to pick a pad set for Tundra calipers.- Grumpy
- Post #13
- Forum: Aftermarket Brakes
-
Tundra calipers isf rotors
Photo credit goes to Motonxruchick184 for these amazing pictures.:top: I've been meaning to do a full review on the Performance Brake Unlimited BBK but kife have been keeping me very busy. 2 track days and about 3k miles of street driving in between, this BBK is a must have...- Grumpy
- Post #9
- Forum: Aftermarket Brakes
-
Which wheels look better
I'll second Coupe's vote. There's enough peeps rockin' TE37.- Grumpy
- Post #11
- Forum: Aftermarket Wheels/Tires
-
keep throwing codes
Unplugged the sensors from the harness and look to make sure that all of the four pins on the harness side are still fasten securely. It may have been damage and/or pulled out from the pigtails from being stretch as per your statement.- Grumpy
- Post #9
- Forum: Stock Performance/Mechanical
-
Reattaching ground effects
Made these out of aluminum, use old broken piece as a template. Sand the plastic with 80 grit to promote adhesion and use epoxy to reattach.- Grumpy
- Post #21
- Forum: Stock Exterior
-
Hey G, got a ? concerning my pully Fan
Oil pressure light is useless. I've starved my engine of oil from high lateral load and the light never came on. In theory, your 2quarts flush would work out fine. In practice, not so much. While idling, there's about 0.5 - 0.75 quart in circulation. Oil in the galleries lubricating bearings...- Grumpy
- Post #7
- Forum: Stock Performance/Mechanical
-
-
Torn between two offsets
With 9.5" width, you can go -3 offset and still have room to go lower. Between those two choices, go with +22.- Grumpy
- Post #4
- Forum: Aftermarket Wheels/Tires
-
-
MSR Houston November 30th 2013.
After checking the vid, my average laps were between 2:02 - 2:04 with fastest lap being 2:01. I bet that GTR owner was sad when he mow the lawn :laugh: -
-
MSR Houston November 30th 2013.
New battery Coolant flush Brake flush TRD brake pads Oil change Transmission fluid change Power steering fluid change Alignment Sway bars upgrade Redline fuel system treatment Almost ready . . . < 2:00 or bust!:rockon: -
TeXfest 2014 Date!
In for factory tour & Six Flags amusement park. March would be better since it leave April for tax return crunch time.
