I know nothing about them, other than I want one as they look sexy. How much do they cost from beginning to end? Are they easy to take off if I wanted to use my truck for some hauling? Also, I have a bed divider from the dealership, would that work with it, or have to come out? Anything else I should know? Thanks guys!
Bed Covers
- Thread starter CaliCorks
- Start date
InkedRunner
New Member
- Joined
- Jan 23, 2008
- Messages
- 2,370
- Reaction score
- 0
the painted hard ones are harder to remove and imo look best. There are leather and or cloth ones that also do the trick and will allow for easy removal. The hard ones are heavy and you need two people and a place to keep it if you take it off. As for the bed divider I have not seen one so I do not know how they workk.
My Gaylords TL series w/ speedster wing was $1250 shipped. There is another vendor on this site xactfit and they have one with a lip for $600 or so.
My Gaylords TL series w/ speedster wing was $1250 shipped. There is another vendor on this site xactfit and they have one with a lip for $600 or so.
Vecte
"Fluffy"
- Joined
- Apr 7, 2008
- Messages
- 4,213
- Reaction score
- 0
You have soft covers that typically roll-up. They range in price form $200-$500+. They are typically very durable, and very easy to work with. You can completely remove them with ease as well. Only downside is, they are not painted to match, and aren't really meant to be stylish.
Then you have covers like the undercover, a lightweight, hard cover. They are very durable, and can take a good bit of abuse. They usually cost in or around $500.
Finally you have hard tonneaus. These are by far, at least in my opinion, the best looking. These are the covers that are painted to match the truck, and usually have their own little design qwerks. These are the most heavy, and typically the most expensive. They range in price from $400-$1500+.
If you are looking for something to work with, and really like the painted hard tonneaus, I would recommend Gaylord's Butterfly cover: http://gaylordslids.com/butterfly.php
Then you have covers like the undercover, a lightweight, hard cover. They are very durable, and can take a good bit of abuse. They usually cost in or around $500.
Finally you have hard tonneaus. These are by far, at least in my opinion, the best looking. These are the covers that are painted to match the truck, and usually have their own little design qwerks. These are the most heavy, and typically the most expensive. They range in price from $400-$1500+.
If you are looking for something to work with, and really like the painted hard tonneaus, I would recommend Gaylord's Butterfly cover: http://gaylordslids.com/butterfly.php
BSP06XRU
Old Member
- Joined
- May 14, 2007
- Messages
- 13,011
- Reaction score
- 102
Here's my Pace-Edwards Full Metal Jack Rabbit.
I don't think you can use the bed divider. This mounts on top of the stock bed rails.
http://www.xr-underground.com/vb3/showthread.php?t=4200
Pace-Edwards web site:
http://www.pace-edwards.com/fullmetal_jr.html
I don't think you can use the bed divider. This mounts on top of the stock bed rails.
http://www.xr-underground.com/vb3/showthread.php?t=4200
Pace-Edwards web site:
http://www.pace-edwards.com/fullmetal_jr.html
Vecte
"Fluffy"
- Joined
- Apr 7, 2008
- Messages
- 4,213
- Reaction score
- 0
Here's my Pace-Edwards Full Metal Jack Rabbit.
I don't think you can use the bed divider. This mounts on top of the stock bed rails.
http://www.xr-underground.com/vb3/showthread.php?t=4200
Pace-Edwards web site:
http://www.pace-edwards.com/fullmetal_jr.html
That is one sexy lookin truck.:top:
