Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

Search results

  1. B

    lowering ball joint spacer $40

    Lower ball joint spacers to lower your 2004-2015 Tacoma approx 1.5 inches. Spacer was machined with high grade steel. Comes with correct grade 10.8 bolts. I had them custom machined for my X Runner when I had it but I sold it before I could install. Will fit any 2004-2015 2wd Tacoma. $40 I...
  2. B

    Adjustable Upper Control Arms

    call them and check with them if it will work our trucks then u should test them out
  3. B

    Key less entry and remote start kit .

    what would we have to do with immobi key system. they said cut the key head off and chip would be in the head... if the chip is not there and ecu will automatically shut down
  4. B

    ball joint spacers

    i live in seattle.... big city and its pretty easy to get good stuff for cheap around here. there are post about flipping arm and yeah i cant see that is possible and curious if it can be done but ok and thanks. :top:
  5. B

    Right rear wheel protrudes outer more than the left rear wheel. Answer to the questio

    it can be move around a bit with the nipple that is present. ive done bunch of times in many vehicles with leaf spring. spacers will work too but its better to get axle adjusted proplery first
  6. B

    ball joint spacers

    what bolt grade do you use? i already got then 10.9 grade bolts with high pressure washers for $10 and now im waiting for my machinery to finish up the spacers. im guessing 1 inch spacers would lower truck like 1 to 1.5 inches? also what has to do with flipping upper arms?? ive reading about...
  7. B

    Right rear wheel protrudes outer more than the left rear wheel. Answer to the questio

    this is exactly what im thinking. get all the ubolts loose and pull and make it even then tighten them. probably wont get it 100% perfect but it will make it look better
  8. B

    Well smoked the clutch

    you will have to pull out again and check whats all wrong with it
  9. B

    Well smoked the clutch

    did you get the flywheel resurfaced? if so did you measure the flywheel step?
  10. B

    2 inch drop blocks

    i also have blocks too. its 2 inch and tapered
  11. B

    ball joint spacers

    you running djm and spacers? my machist probably wont charge me that much. i found old market thread and they were selling it for more than $100
  12. B

    just finished djm 3 inch drop

    ^ i need to know too! lol :top:
  13. B

    ball joint spacers

    im sure someone here used the ball joint spacers on their 2 gen tacomas. the spacers goes between the balljoint bracket and knuckles. for those who had used those spacers. is it any good? im having my machist to make me the set and possible will be able to do mass productions for some of you...
  14. B

    charcoal canister delete anyone???

    the 4 link or trac bars would be hitting the charcoal canister. i got 4 link set up figured out now and ill be running 4 link with canister inact
  15. B

    Will it fit? 19" Varrstoens

    you can buy a set and i put them in my truck then ill tell you if it fits ;)
  16. B

    charcoal canister delete anyone???

    yeah i probably can make some plug in resistances.. sound like a good idea
  17. B

    charcoal canister delete anyone???

    CEL is def must be off due to our state emission or else i cant get tabs. i probably could just move it but hopefully ucon can fix it. i cant get ucon in my truck since its 09:thumbdown:
  18. B

    charcoal canister delete anyone???

    have anyone delete their charcoal canister off our trucks? ive done that bunch of my previous cars but never done that to obd2 cars... i would like to delete mine or is there ones that i can replace it with? im having plans on going triangle 4 link and will need this area cleared. thanks guys...
  19. B

    URD Y Pipe Question

    what about doug thorley y pipes? the doug is equal lenght.
  20. B

    LSD modification

    when i had my first drift car it was miata thats inch off ground and -8 degree of camber when i was 17 years old lol its been a while ago. my xrunner is my daily and i have an s13 that i race. i will not be worried about losing traction at corners if i was only going to drive it once a while...
Top Bottom