Belt routing diagram??

[Slywhitty]

My mom just blew the belt on her 06 dub cab 4.0. She can't find her owners manual and the search on here is shit on my phone. Can anyone post a link to the diagram for me. She's three hours away from me and my stepdad is gonna change the belt for her but he doesn't how to route it. Help please!! Lol

 

[STONER-X]

look under the hood? should be on a sticker

http://www.ncttora.com/fsm/05+/data/ileaf/06toyrm/06toypdf/06rmsrc/rm2006ta/00700.pdf

1GR-FE ENGINE MECHANICAL​

​

​

​

​

– DRIVE BELT EM–7​

EM​

INSTALLATION​

1. INSPECT V-RIBBED BELT TENSIONER ASSEMBLY​

(a) Check that nothing gets caught in the tensioner by
turning it clockwise and counterclockwise.
If a malfunction exists, replace the tensioner.​

2. INSTALL FAN AND GENERATOR V BELT​

(a) While turning the belt tensioner counterclockwise,
align with its holes, and then insert a bar of 6 mm
(0.24 in.) into the holes to fix the belt tensioner.
(b) Install the V-ribbed belt.
(c) While turning the belt tensioner counterclockwise,
remove the bar.
(d) If it is hard to install the V-ribbed belt, perform the
following procedure.
(1) Put the V-ribbed belt on all parts except the P/S
pump, as shown in the illustration.
(2) While releasing the belt tension by turning the
belt tensioner counterclockwise, put the Vribbed
belt on the P/S pump.​

3. INSTALL NO.1 ENGINE UNDER COVER SUBASSEMBLY
(for Pre Runner and 4WD Type)​

(a) Install the engine under cover with the 4 bolts.​

Torque: 29 N*m (296 kgf*cm, 21 ft.*lbf)​

Turn
Holes​

A076442E02​

P/S
Pump
Water Pump Idler No.2 Generator
Crankshaft
Idler No.1 A/C Compressor
Idler No.2
Tensioner​

A076443E01


.



trying to post a pic sorry

 

[Slywhitty]

Thanks man. That's perfect. I'm not there and I know my truck doesn't have the sticker so just wanna make sure I had it to email to her.