- Joined
- May 25, 2008
- Messages
- 14,814
- Reaction score
- 54
Stroker build?
- Thread starter JPAYNE722
- Start date
thewarriordinghy
Member
- Joined
- Apr 9, 2015
- Messages
- 583
- Reaction score
- 11
Do custom cams? Also, can you build it yourself, or are you taking it to someone?
- Joined
- May 25, 2008
- Messages
- 14,814
- Reaction score
- 54
Who are you referring these questions to?
thewarriordinghy
Member
- Joined
- Apr 9, 2015
- Messages
- 583
- Reaction score
- 11
OP. I read the whole thread, saw the cams are hhard to source, and that everyone says take it to an engine builder.
- Joined
- May 25, 2008
- Messages
- 14,814
- Reaction score
- 54
There is actually a group buy thread on TW , for the cams. Although there are only two people on it right now. ~$1200 for the set. https://www.tacomaworld.com/threads/kelford-cams-gb-feeler.430356/
The stroker engine build needs to be taken to a machine shop, unless you have the tools to install, and clearance everything yourself. Primarily just the short block. Unless you desire head work as well. For those not feeling confident in assembling or disassembling a block, then the whole engine should go.
My repaired and finished stroker short block.
The stroker engine build needs to be taken to a machine shop, unless you have the tools to install, and clearance everything yourself. Primarily just the short block. Unless you desire head work as well. For those not feeling confident in assembling or disassembling a block, then the whole engine should go.
My repaired and finished stroker short block.
JPAYNE722
Active Member
- Joined
- Oct 26, 2011
- Messages
- 1,194
- Reaction score
- 2
If gadgets still has his at the end of the year ill probably get those and do a dyno before and after and see what the gains are
