Whaaa that's not an X runner build

Discussion in 'Member Builds' started by Nashman, Jun 9, 2016.

  1. Nashman

    Nashman Member

    Joined:
    Oct 22, 2015
    Messages:
    323
    Likes Received:
    9
    Well for fun I figured id share what I am building right now

    Bring back my supra from it's death 5 years ago



    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]



    video
    https://www.youtube.com/watch?v=c1y7X_WREvA
    https://www.youtube.com/watch?v=iY26NFg6AN8 breaking traction on the rollers


    and now to bring it back to life

    with new parts custom made parts and some bought but not many since i liek to build every thing my self

    [​IMG]
    [​IMG]
    [​IMG]


    New wheels

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    turbo still have to change up the header thou basicly mod it a bit

    [​IMG]
    [​IMG]
    [​IMG]

    Group A head and stage 3 trd cams

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]


    Group A oil pan restore

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]


    Old turbo kinda sat to high so it for sale

    [​IMG]
    [​IMG]

    throttle body and wasgate

    [​IMG]
    [​IMG]
    [​IMG]
     
    #1 Nashman, Jun 9, 2016
    Last edited: Jun 9, 2016
  2. Nashman

    Nashman Member

    Joined:
    Oct 22, 2015
    Messages:
    323
    Likes Received:
    9
    Well I have order a bunch of junk and did some work oh the fun


    [​IMG]
    aww looks it so cute

    [​IMG]
    then I chopped it's bloody head off

    [​IMG]
    2.5 inch pipe oveld then re rounded again

    [​IMG]
    it's been a wail

    [​IMG]

    [​IMG]


    and that's it for now
     
  3. Nashman

    Nashman Member

    Joined:
    Oct 22, 2015
    Messages:
    323
    Likes Received:
    9
    Well parts keep coming in

    [​IMG]

    I got to take my boat out the other day to bad it was shitty trip windy as hell sadly any way I installed a Curt hitch on my X runner to tow my boat, but I think may need more power heheh.

    Funny part about my fishing trip is the boat trailer sinking in the sand and me doing a 10 foot rolling burn out up the off ramp because I just gave it a good tug ya would say and ketp my foot in it abit

    [​IMG]
     
  4. Coupe

    Coupe Active Member

    Joined:
    Dec 31, 2007
    Messages:
    6,871
    Likes Received:
    13
    Pretty sweet...........
     
  5. kwigs160966

    kwigs160966 Member

    Joined:
    Oct 5, 2011
    Messages:
    631
    Likes Received:
    3
    That's some nice welding. I also have a Lincoln 180 it's a beauty little machine.

    That build looks like a tonne of work.

    Looks beautiful
     
  6. Torspd

    Torspd Moderator
    Staff Member

    Joined:
    May 25, 2008
    Messages:
    14,814
    Likes Received:
    40
    That's some serious man hours right there! What are your goals on this revival?
     
  7. Nashman

    Nashman Member

    Joined:
    Oct 22, 2015
    Messages:
    323
    Likes Received:
    9
    Thanks every one


    as for power wise I could do over 1000 at the tire but 35 psi is tad much lol but at lest the new clutch can take it now the old one was a 650 slick max ish clutch

    but once she is ready and enjoyed all turn it up to about 800

    but who really know with this build I have a crazy flowing head with crazy cams from a group A race car from japan matching crazy rare oil pan I know of 2 of them left in the world that fellow members own besides the old race cars that are in show rooms and one that still races from time to time

    https://www.youtube.com/watch?v=rVrRo8lweP0



    over all there is lots to come lots of stuff ya have not even seen yet
     
  8. Nashman

    Nashman Member

    Joined:
    Oct 22, 2015
    Messages:
    323
    Likes Received:
    9
    just an idea this is what the stock intake ports look like


    [​IMG]

    [​IMG]
     
  9. Redlantern

    Redlantern Member

    Joined:
    Jan 28, 2013
    Messages:
    517
    Likes Received:
    5
    Good god that things a beauty! Is that comp turbo their oilless version?
     
  10. Torspd

    Torspd Moderator
    Staff Member

    Joined:
    May 25, 2008
    Messages:
    14,814
    Likes Received:
    40
    Keep the updates coming!
     
  11. Nashman

    Nashman Member

    Joined:
    Oct 22, 2015
    Messages:
    323
    Likes Received:
    9
    No I went with the water less thou bb version very light too
     
  12. Nashman

    Nashman Member

    Joined:
    Oct 22, 2015
    Messages:
    323
    Likes Received:
    9
    Well turns out I will be building 2 cars at the same time


    doing a foreword facing intake manifold, inter cooler, piping install and map ecu

    wail doing mine


    but some shit came in and now i can start working on my car and this is what I have gotten done so far

    [​IMG]
    [​IMG]
    took apart my oil oil system and have these gems to play with
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
     
  13. fishsticks

    fishsticks Because fast lifted truck.

    Joined:
    Nov 29, 2015
    Messages:
    207
    Likes Received:
    6
    Sweet, I'm not the only one who uses those as welding clamps. :laugh:
     
  14. Nashman

    Nashman Member

    Joined:
    Oct 22, 2015
    Messages:
    323
    Likes Received:
    9

    i don't fallow you mean my vice
     
  15. fishsticks

    fishsticks Because fast lifted truck.

    Joined:
    Nov 29, 2015
    Messages:
    207
    Likes Received:
    6
    Yeah. I have a few of those.
     
  16. Torspd

    Torspd Moderator
    Staff Member

    Joined:
    May 25, 2008
    Messages:
    14,814
    Likes Received:
    40
    Is that an inline oil filter, I see? Looks like it is in the braided hose, from the behind intake manifold, to behind the brake fluid reservoir.
     
  17. Nashman

    Nashman Member

    Joined:
    Oct 22, 2015
    Messages:
    323
    Likes Received:
    9
    Brake booster line with check valve
     
  18. Torspd

    Torspd Moderator
    Staff Member

    Joined:
    May 25, 2008
    Messages:
    14,814
    Likes Received:
    40
    Ahh. Gotcha
     
  19. Nashman

    Nashman Member

    Joined:
    Oct 22, 2015
    Messages:
    323
    Likes Received:
    9
    Well it was kinda tricky but I did fit 4 inch down pipe in all post pics when I plum waste gate in
     
  20. lingenfelterm

    lingenfelterm Member

    Joined:
    Nov 9, 2014
    Messages:
    51
    Likes Received:
    0
    Looking sweet! That is one sick MK3.
     

Share This Page

  • About Us

    XR-Underground is a dedicated community of Toyota X-Runner enthusiasts that was launched in January 2007. X-Runner Underground.com, referred to as XRU by our regular members, offers an active discussion forum, group events, specialty merchandise, a welcoming community of owners and the most information you can find about the Toyota X-Runner on the internet!
  • Quick Navigation

    Open the Quick Navigation

  • Like us on Facebook

  • Your donations keep XRU going

    XRU is a forum for the users, by the users. We receive very limited funding from vendors so we really rely on donations to cover our operating costs and to provide products and giveaways at events. Every dollar helps!

    If you are able to donate, we'd really appreciate your help.