Bed alignment

[xrunrob]

So i just got new rims and i noticed how one side stick farther out on the pass side then the driver. i tried to adjust the bed but ran out of adjustment. is there a way replace the little spacers underneath the bolts with more oval ones for more adjustment? or does anyone have any suggestions. Here are some pics of what im talking about.
Right Side

Left Side

Right

Left

 

[xrgilly]

from my understanding the majority of these trucks are like this
good luck

 

[Nick_c]

The whole bed is cocked. My truck had the same problem. I loosened the six bolts in the bed pushed it all the way forward and got out a tape and centered it up. Mine wasn't out more that a quarter of an inch in any one spot. But that little amount Made a big difference.

 

[xrunrob]

I lossened all the bolts and tried to adjust everything. What is your gap from the bed to the cab. Mines about 1.5 + or - 1/8 inch or so.

 

[lvxr]

so did it end up lining up correctly after you guys loosened the bed bolts and evened it out? or did it only help a little?

 

[Workman3886]

My passenger side sticks out a tad more, haven't gotten around to messing with it but it does irritate me

 

[Vandy01]

My truck went back to Toyota today for this reason. They gave me a rental are fixing it. Said it
Could take 4 days.

 

[xrunrob]

4 days!? Damn. Well I haven't messed with it again but I got a felling I'm going to have to make some custom spacers that go between the need and frame so I can get more adjustment
Keep us up to date on what the dealer does for u please.

well just relooked at the holes. no way to make a different spacer they are part of the bed. i dont know why toyota did make these sleeves more oval for adjustment.

 

[Vandy01]

Just got my truck back looks great. They just shifted it around until they got it right.

 

[triumphx]

Yup got the same problem, luckily I found a t55 torn at my work so will be tackling this soon

 

[xrunrob]

Awesome. Guess ill just keep messing with it till its right. I don't see any way of getting more adjustment but ill try. Thanksfor the update . At least I'm not the only one with this problem.