Need a 2015 Tacoma V6 to test UCON-EMS

Gadget

Well-Known Member
Looking for a 2015 Tacoma V6 near URD in Maryland to test the latest UCON prototype.

Anyone interested??

B9E55501-5B41-4AFA-9C01-B61E0E0511C1_zpsdasur6oz.jpg


9375C6AC-F368-49E2-A9D1-3F3D0E803348_zpsusihwsa7.jpg


7FF6992A-9191-48D4-8424-E7D99B42C92E_zpszi19lhfe.jpg
 

Gadget

Well-Known Member
I have one in my 2010 4Runner with the prototype Whipple supercharger system on it. Runs FANTASTIC.

That last picture is the auto soldering machine. Don't know what the technical name for it is. The boards are stacked up in line and move down that track. Then a cone with molten solder comes up from the under side and solders all the pins on the connectors. Then it is flipped over and run through to hit the ones on the other side. That picture does not show much, all the cool stuff is going on on the underside. Solders all those 186 pins in just a second or two.

G
 

Gadget

Well-Known Member
I have a guy local with with an 09 so if I can test it in a 15 that should cover them all from 09-15.

Well that is the idea anyway.

G
 

revobreaker

Moderator
Staff member
I have a guy local with with an 09 so if I can test it in a 15 that should cover them all from 09-15.

Well that is the idea anyway.

G

Hope I know that guy with the 09:smile:


That solder machine must have been cool. I love the show 'How Its Made' it would be aewsome to watch Ucons coming down the assembly line!
 

XMPLRY808

Active Member
I have a 2015 xrunner located in Hawaii tho. I'm already running a maf cal with map sensor but I'm willing to help out the XR community. Lmk
 
Top