Official Aftermarket Wheel and Tire Spec Thread

[Venomous_X]

^ So much Win! Snoopy did you have someone come and measure for your fitment professionally, or did you come up with your own measurements?

 

[dramad1]

Snoopy them rims and tires are bad ars. I like alot.

 

[Snoopy_TXR]

^ So much Win! Snoopy did you have someone come and measure for your fitment professionally, or did you come up with your own measurements?

It was more of a guess lol. The guy I bought it from let me borrow the rims for a test fit. To my surprise they worked! It came off a Maserati Quattroporte.

Snoopy them rims and tires are bad ars. I like alot.

thanks bro!

 

[Venomous_X]

It was more of a guess lol. The guy I bought it from let me borrow the rims for a test fit. To my surprise they worked! It came off a Maserati Quattroporte.



thanks bro!

Alright, I gotta know how much you forked over for those babies.... Those usually crank for 1200 a piece, and you can PM me if you'd rather keep it discrete.:adore:

 

[Tunedx]

Nice setup. Those specs look solid!!

 

[RMCO]

Wheel- HRE 948R Matte Black Center and Gloss Black Lip

Front-
offset: +53
width: 10"
tire: Nitto NT 555 (275/35/20)

Rear-
offset: +46
width: 12"
tire: Nitto Invo (315/35/20)

Drop- DJM 3"/3"

BBK- None

Trimming- None

No clearence issues? They look amazing!

 

[Snoopy_TXR]

No clearence issues? They look amazing!

Thanks. There was clearance issues. The front wheels were rubbing against the sway bar on a full turn. I fixed that issue by adding 25mm spacers. For the rears, the oem wheel studs were a bit too short to lock the wheels in safely. I removed the rear drums and replaced the wheel studs with longer ones I bought from Napa. Shout out to Torspd for his "ARP Wheel Studs" thread and tacomaworld.com. It had all the wheel stud info. I needed on there:top:.

 

[czar_dom]

Those wheels look very nice Snoopy. Nice upgrade. With that much wheel and rubber bet your taking a hit on gas mileage now :rolleyez:

D.A.C

 

[jeremydittrick]

HAMANN HM2 18X8.5 +13 OFFSET, wrapped in NITTO 555'S, 255/45/18

NO SUSPENSION MODS

 

[shook]

Wheel- HRE 948R Matte Black Center and Gloss Black Lip

Front-
offset: +53
width: 10"
tire: Nitto NT 555 (275/35/20)

Rear-
offset: +46
width: 12"
tire: Nitto Invo (315/35/20)

Drop- DJM 3"/3"

BBK- None

Trimming- None

Your setup looks really good, 315s in the rear must look crazy from the rear. :top:

 

[ultraxr]

Wheel- HRE 948R Matte Black Center and Gloss Black Lip

Front-
offset: +53
width: 10"
tire: Nitto NT 555 (275/35/20)

Rear-
offset: +46
width: 12"
tire: Nitto Invo (315/35/20)

Drop- DJM 3"/3"

BBK- None

Trimming- None

Sexiest stance by far on any XR i've seen. :adore:

 

[Mr.X]

WHEEL: Enkei RPF1

COLOR: F1 silver

FRONT:
- Offset +15
- 18x10.5
- 255/45/18 Federal
- DJM 3inch LCA/UCA+ stock height springs
REAR:
- Offset +15
-18x10.5
-285/40/18 Goodyear F1 Supercar
- SS leaf+ 1.75 block (overall 4inch drop)

TRIMMING:
- yes about half a inch or a little less only in the rear tho

BBK:
- yes

 

[Sproulesxrunner]

Wheel- HRE 948R Matte Black Center and Gloss Black Lip

Front-
offset: +53
width: 10"
tire: Nitto NT 555 (275/35/20)

Rear-
offset: +46
width: 12"
tire: Nitto Invo (315/35/20)

Drop- DJM 3"/3"

BBK- None

Trimming- None

I really want those rims in that offset/width. :fok::allhail:

Bump for more pics!

 

[Torspd]

Thanks. There was clearance issues. The front wheels were rubbing against the sway bar on a full turn. I fixed that issue by adding 25mm spacers. For the rears, the oem wheel studs were a bit too short to lock the wheels in safely. I removed the rear drums and replaced the wheel studs with longer ones I bought from Napa. Shout out to Torspd for his "ARP Wheel Studs" thread and tacomaworld.com. It had all the wheel stud info. I needed on there:top:.

Thank you sir. :top: Really dig your wheel choice. Perfect complement to you ride. Have had HREs on the back burner for the longest.

As for the gas mileage post, those wheels and tires combined, I bet are barely heavier than stock, if heavier. I also bet that the over a diameter is larger than stock by just a hair, so if that is true, then he should actually be seeing better mileage when cruising due to lower rpms.

 

[Gxrun]

now thats what im talking cherry!!!!

 

[Surfrider82]

Just got my new shoes....pics coming soon

 

[xrgilly]

daialloy

18"x9.5" +35 on all 4
stock rubber
XII coils and monoleafs

 

[revobreaker]

I finally get to participate!

Wheel- TSW Zolder 5

Front-
offset: +20
width: 8.5"
tire: Nitto NT555 (255/35/20)

Rear-
offset: +25
width: 10"
tire: Nitto NT555 (275/35/20)

Drop- Original SittinSic front coils and Composite Leafs

BBK- None

Trimming- None

 

[lovemym]

Xxr 530's Chromium Black, 18x8.75 and 18x9.75 + 20

 

[mdeezy]

Sexiest stance by far on any XR i've seen. :adore:

+11000

love the look!