TRD(Magnuson) S/C Quick Change Pulley

[Torspd]

Have you seen this @Gadget?

From TW

https://www.tacomaworld.com/threads/supercharger-quick-change-pulley.497402/

 

[Hard Taco]

hmm

 

[whippersnapper02]

Awesome. I figured there was a kit that would work.

 

[30Birdy]

Great find. Wish the superchargers came with that installed from the factory.

 

[Torspd]

So who is willing to go for it???

 

[Torspd]

Who is willing to go for it???

 

[MaK10-XRnR]

Who is willing to go for it???

I haven't done the fuel mods to support this, nor do I feel like buying another supercharger belt since I just bought a brand new gatorback for the stock pulley. lol I guess I could drop down to a 2.75 - 2.8 from stock but...

 

[Gadget]

How often do people change pulleys?

 

[MaK10-XRnR]

How often do people change pulleys?

Agreed, It's kind of a one and done thing. Unless you're in the state of California and you have to swap a stock pulley back on for smog purposes. UNLESS.... we can smog just fine with an aftermarket one? Then the point is moot

 

[whippersnapper02]

I see it as a pulley trial mod. Someone can go down a lower pulley, see what fuel looks like and swap back if it goes lean. Or pump gas boost levels vs race gas boost levels.

 

[GT7]

Is a 255lph good enough for this? With say a 2.7 or 2.6? Trd blower injectors

 

[TRON]

Is a 255lph good enough for this? With say a 2.7 or 2.6? Trd blower injectors

I don't know of anyone having a 2.6 or smaller pulley running around with only a 255 fuel pump and TRD injectors especially at sea level. That guy on tacomaworld might wanna be checking his #5 and #6 spark plugs often. I can't believe his afrs are good since he has 2 stock cats up stream from his afr sensor. Time will tell

 

[wolfpack_5150]

I don't know of anyone having a 2.6 or smaller pulley running around with only a 255 fuel pump and TRD injectors especially at sea level. That guy on tacomaworld might wanna be checking his #5 and #6 spark plugs often. I can't believe his afrs are good since he has 2 stock cats up stream from his afr sensor. Time will tell

2.3
https://www.tacomaworld.com/threads...-tricks-and-mods.518932/page-16#post-16452280

 

[x-runner kid]

2.3
https://www.tacomaworld.com/threads...-tricks-and-mods.518932/page-16#post-16452280

I wouldn’t be worried about the boost levels but more so making too much heat from over spinning the trd blower.

 

[wolfpack_5150]

I wouldn’t be worried about the boost levels but more so making too much heat from over spinning the trd blower.

He said the blower is more effecient than we were lead to believe.
Eaton used to be easy to navigate and they had graphs about temps vs rpm and effeciency.

Last 2yrs or so i cant find jack crap on their site for the m/mp90.

Anyone know the point of diminishing returns on pulley size without a 7th or meth?

 

[x-runner kid]

Ya idk

He said the blower is more effecient than we were lead to believe.
Eaton used to be easy to navigate and they had graphs about temps vs rpm and effeciency.

Last 2yrs or so i cant find jack crap on their site for the m/mp90.

Anyone know the point of diminishing returns on pulley size without a 7th or meth?

Ya idk used to be said that you could only spin the trd blower so fast as well.