By registering with us, you'll be able to discuss, share and private message with other members of our community.
SignUp Now!You just need a standard USB Printer Cable. The flat side plugs in to your PC and the square side plugs into the UCON's communications port.
The calibration files are currently in 3 stages:
Stage 1, with cats
Stage 2, without cats
Stage 3, turns on 7th injector, same cal as stage 2.
Keeping things real simple for everyone.
G
You just need a standard USB Printer Cable. The flat side plugs in to your PC and the square side plugs into the UCON's communications port.
The calibration files are currently in 3 stages:
Stage 1, with cats
Stage 2, without cats
Stage 3, turns on 7th injector, same cal as stage 2.
Keeping things real simple for everyone.
G
Give me a call when you are ready to go further.
G
Very strange.
I ran your unit in my truck for a few days and it was GTG.
Just take it out and get it back to me and I will replace it with a brand new unit.
G
Any update? How to connect the ethanol sensor to the UCON?The E85 thing is not a high priority because so few people are running it, but you will be able to do it two ways, the USB on the fly thing or install the ethanol sensor so the UCON will know your ethanol content and automatically adjust the calibration for proper operation without any user input like the OEMs do it with their flex fuel vehicles.
G
Interesting, Id like to know this info as well..Any update? How to connect the ethanol sensor to the UCON?