GSX-Runner
New Member
- Joined
- Jan 17, 2007
- Messages
- 487
- Reaction score
- 0
The bushing on my stick failed and now its ridiculously limp. I tried the loose shifter fix with drilling holes and filling with "right stuff" and it still has way to much play. I think the only way that method would be affective is if you did it befor your had any problems.
My question is has anyone taken apart the stick and fixed it using a different method. I was thinking about cutting a small section like 1-2" then welding it back together. The only problem is I like to drive with my hand on the shifter and I'm afraid it would vibrate to much. Does anyone have any suggestions on how to make it not vibrate if I were to cut and weld it? Thanks.
My question is has anyone taken apart the stick and fixed it using a different method. I was thinking about cutting a small section like 1-2" then welding it back together. The only problem is I like to drive with my hand on the shifter and I'm afraid it would vibrate to much. Does anyone have any suggestions on how to make it not vibrate if I were to cut and weld it? Thanks.